METAL ROLL FORMING MACHINE
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
High Speed Galvanized Steel IBR Wall Panel TN40 Trapezoidal Roof Sheet Roll Forming Machine
HighSpeedGalvanizedSteelIBRWallPanelTN40TrapezoidalRoofSheetRollFormingMachineTN40roofingpanelisthestandardprofileinAlgeriamarket,thereisal...
Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988
Detailed Content
High Speed Galvanized Steel IBR Wall Panel TN40 Trapezoidal Roof Sheet Roll Forming Machine
TN40 roofing panel is the standard profile in Algeria market, there is also TN35 for you choose. we have produced lots of these machines to Algeria market, and get many positive feedbacks from our Algeria clients.
TN40 roof sheet roll forming machine, there are economic speed and high speed for you choose. means 20m/min, 30m/min and 40m/min, and the finished products are used mainly in European and Africa market.
TN40 Roof Sheet Machine Detail:
Thickness : 0.4-0.8mm
Material : G550, pre-painted sheets
Input width : 1250mm
Coil ID: 508mm
Effective width:1000+/-4mm
Material weight: 5Tons cap.
Certificate : CE by TUV
Driven motor: by 7.5Kw or 11kw motor with gear box or higher
Cutter Material: Cr12, heat treatment
Description/Technical Parameter details of complete line:
·
10TX1250mm Hydraulic Un-Coiler
·
Hydraulic system to expand coil inner hole, Pump motor: 3KW
Coil Inner-diameter= 510±30mm
Load Capacity: Max. 10 Tons, Coil Width Max. 1250mm
Taper wedge expand type
Driving motor to turn the coil, 3KW,
Delta/Schneider brand inverter
Other design such as snubber arm /support arm/coil car as per request
·
Entry bench & Manual Pre-shearing device
·
to cut off the end of the final piece of sheet only
Working thickness: max. 0.8mm
·
Roll forming machine with cutting details as below table :
·
|
Suitable roll forming material |
Color steel sheet or galvanized steel sheet, G550 |
|
Thickness |
0.4-0.8mm |
|
Coil feed in width |
1219mm |
|
Carriage Frame design |
Wall-plate-frame-design or stand frame desig |
|
Roll forming stages |
24 stages |
|
Material of forming roller |
45# steel, CNC lathes, Hard Chrome Coated |
|
Shafts Diameter |
Φ75/95mm |
|
Main motor power |
7.5Kw with reducer |
|
Line speed of roll former |
20m/min or higher |
|
Hydraulic group power |
5.5 Kw |
|
Cutting material |
Cr12, hear treatment |
|
Electric Voltage Standard |
380V/50Hz/3PH or as request |
|
Major Painting Color |
Customized and RAL5015 as standard |
· PLC Control System
· Cut to length control
Cut-to-length tolerance≤±1mm
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Schneider brand low voltage electric elements
· Product Rack 3 units, no power rack
· Normally, the full mesh around un-coiler and the roll forming machine and cutting device is required as the CE request, the interlock and safe relay is also included.
Profile Drawing/Layout/Equipment reference pictures:
There are also some TN40 roof sheet panel roll forming machines working video for you check, please click bellow link:
https://www.youtube.com/watch?v=LAa_ExFvVes
Any interest, welcome to contact us.
CONTACT US
Contact Us For More Roll Forming Machine Detailed Information
You can contact us either through phone number 0086-15127728988 within our working hours, or send an email to [email protected], or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.