METAL ROLL FORMING MACHINE
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
‹ › This line sits at the end of a channel profile line and handles only what comes after forming. An automatic palletizer machine in this position does not form profiles, and it is not a general robot palletizer. It pairs two profiles into a set, stacks them in the pattern the order calls for,…
Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988
Detailed Content
This line sits at the end of a channel profile line and handles only what comes after forming. An automatic palletizer machine in this position does not form profiles, and it is not a general robot palletizer. It pairs two profiles into a set, stacks them in the pattern the order calls for, straps the stack with PP tape, and palletizes the bundle for a forklift.
Plants sometimes call this a stacker, since stacking and palletizing share one frame. Scope stays fixed: bundling, stacking and palletizing at the end of a channel profile line.

The product here is a keel bundle, long profile sections packed in rows and shipped as bundles. The same part is sold as furring channel in some markets. Sections differ from plant to plant, so the channel automatic stacker machine is set up per section, not against a fixed list of types.
Work sits in the packing area at the end of a roll former line, in export plants with many order batches, in overseas plants run by a local crew, and in plants where bundles go to storage or into a container by forklift. The industry is light steel keel production and cold formed profile processing.

| Item | Configuration |
|---|---|
| Profile length | 2.6 to 4.0 m |
| Bundle width | 900 to 1200 mm |
| Bundle height | 850 mm or less |
| Bundle pattern | 12 pieces per bundle (2×3×2) |
| Working speed | 3 m profile, 12 pieces per bundle: up to 70 m/min. 24 pieces per bundle: up to 100 m/min |
| Strapping material | PP packaging tape |
| Power | 380V 50Hz, 3 phase |
| Interface | Chinese and English |
| Drive | Multi station servo drive. Pairing, lift stacking, tape wrapping, pulling, palletizing travel and palletizing lift are all servo controlled |
| Footprint | 9.0 m working length, 2.5 m width |
| Recipes | 50 keel types |
A plant buying an automatic palletizer machine sees bundle counts move for ordinary reasons. A container plan sets how many pieces go in a bundle. A buyer's consumption sets how many he opens at a time. Manual lifting has a weight limit. Some buyers hold receiving standards for stores or sites, and those are written into the purchase contract.
When the count cannot move, the cost sits outside the spec sheet. The crew pulls people off other work to repack, and each extra handling adds another chance to scratch the ends.
Three kinds of change matter, and they do not cost the same.
The line runs 12 pieces per bundle in a 2×3×2 pattern, and it can also run 24 pieces per bundle. Working speed reaches up to 70 m/min at 3 m profiles with 12 pieces per bundle, and up to 100 m/min at the same length with 24 pieces per bundle. Longer profiles run lower.

Strapping uses PP packaging tape, and the tape unit is built around the keel bundle shape.

A plant with mixed orders loses time at size changes. The recipe system holds motion values for up to 50 keel types, and calling up the matching record saves entering the values again. Recall has a limit: a large size change may still need guide, clamp or bundle positions moved by hand.
Servo control carries the changeover on an automatic palletizer machine. Pairing, lift stacking, tape wrapping, pulling, palletizing travel and palletizing lift all run through a multi station servo drive, so positions and speeds come from program values. Two profiles arrive, and the pairing plate rotates to bring one onto the other. The stacking section uses screw drive, and the upper drive shaft is fully guarded.


Neat bundles and easy handling keep the finished goods area in order, and four choices in the build work toward that.
Clamping uses soft rubber with adjustable air pressure, and that handles thin material such as a 0.3 mm keel. Thin material marks easily, so test with your own material on site. Bundles that stay neat stack by batch, and the crew can load without restacking.


Four points are easier to settle before the order than after installation.
Send your profile section, the lengths you run and your packing requirements, and the configuration can be checked against them. That is what lets an automatic palletizer machine follow your orders instead of asking your orders to follow the machine. The machine is adjusted to each customer's packing scheme.

Contact Us For More Roll Forming Machine Detailed Information
You can contact us either through phone number 0086-15127728988 within our working hours, or send an email to [email protected], or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.