Many people buycz purlin machinejust to see if it can make a certain size. They miss a real issue. The steel coils in your workshop are not always the same material. Today you get galvanized coil. Tomorrow you might get cold rolled coil. The day after that it could be hot rolled coil. If your machine only takes one material, you need another machine when the material changes. That costs too much. Ourauto cz purlin machineis built from the start for multiple materials. Galvanized steel, low carbon steel, cold rolled coil, hot rolled coil – it runs them all. Whatever coil you have, it makes the purlin. Take a close look at how well this machine adapts to different materials.

Why Your Production Line Needs a Non Selective Forming Machine

Small and medium workshops rarely get orders for just one material. A construction site might want galvanized purlins to prevent rust. An agricultural greenhouse might use cold rolled coil to save cost. A warehouse rack might need hot rolled coil for extra strength. If your auto cz purlin machine only works with galvanized sheet, you have to send cold rolled orders to someone else. Then half your profit goes away.

Another issue appears when the coil market runs out of something. The material you buy today might be different from last time. Without a flexible machine, you either stop production or force it and make scrap. Our auto cz purlin machine takes away that headache. Galvanized or black, Q195 or Q355, it runs stable. No part changes needed..

Material Range of This Forming Equipment

According to the machine specs, all the following materials can go straight into production:

• Galvanized steel coil
• Low carbon steel coil
• Cold rolled coil
• Hot rolled coil

The yield strength range covers Q195, Q235, Q345, Q355.
The material thickness range is 1.0 to 3.0 mm.

So from the softest Q195 to the higher strength Q355, from 1 mm thin sheet to 3 mm thick plate, this auto cz purlin machine takes it all. You do not need different forming machines for different materials.

Parameters

The table below shows the main technical parameters of  auto cz purlin machine. All values come from the actual equipment specs.

The forming speed and main motor power depend on the actual configuration.

The full production flow

Decoiler → Feeding →Leveling → Punching → Forming → Cutting → Receiving table

Decoiler: It feeds material steadily without pulling or piling.

Punching system: It makes clean holes with long lasting dies.

Main roll forming system: The frame stays rigid and all rollers run together.

Cutting method: The post cutting gives you accurate length every time.

Receiving table: The automatic stacker arranges finished products neatly.

Practical Benefits of Multi Material Capability

Accept More Orders

You can now accept inquiries for both galvanized and cold rolled materials. This flexibility helps you easily secure both small batch jobs and large volume contracts.

Prevent Production Downtime

If a specific coil type is unavailable, simply switch to an alternative material in stock. This ensures your production continues without any interruptions.

Reduce Equipment Investment

One auto cz purlin machine handles all common materials. This saves valuable floor space and capital that you can use for other business needs.

Improve Material Utilization

The machine adapts to different material hardness automatically. This prevents wrinkling and reduces scrap rates, yielding more finished product per ton.

Additional Features That Simplify Operation

Beyond material versatility, the machine includes several practical designs.

One button C/Z changeover.
You do not need to swap dies between C purlin and Z purlin production. A simple touch screen press initiates the change.

Automatic encoder length measuring.
No manual tape measure is required. The encoder reads length automatically and coordinates with hydraulic cutting. Accuracy remains consistent.

PLC recipe storage.
You can save dozens of frequently used sizes inside the system. When you repeat a previous size, simply recall it. No need to re enter parameters.

Two emergency stop buttons.
One red button sits on each side of the main machine. Slap either button and all motion stops immediately.

What to do next

If your workshop often switches between different coil materials, or if you plan to take orders for purlins in various materials, this CZ roll forming machine is a good fit for you.

We can provide the following:

• A forming test with your common materials. You send a small sample, we run it.
• An electrical plan customized to your local voltage and frequency.
• A complete quotation that includes all parameters.

Contact us directly for more information.

Contact: Elliot liu

Email: [email protected]

WhatsApp: 008615127728988