METAL ROLL FORMING MACHINE
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
‹ › A complete metal cut to length line turns coils into flat cut sheets. It covers hydraulic loading, uncoiling, leveling, cutting to length, and automatic stacking. The setup of each unit directly affects sheet quality and how the whole line runs. To judge whether this equipment fits your job, look at your coil specs and sheet…
Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988
Detailed Content

A complete metal cut to length line turns coils into flat cut sheets. It covers hydraulic loading, uncoiling, leveling, cutting to length, and automatic stacking. The setup of each unit directly affects sheet quality and how the whole line runs.
To judge whether this equipment fits your job, look at your coil specs and sheet length needs. A metal cut to length line setup should match your coil specs to the uncoiler and leveler, your sheet length to the cutting and stacking setup, and your sheet width to the conveyor and stacker.
A cut to length line machine produces flat metal sheets. These sheets are commonly used in the following areas and industries:
Cut sheet production: flat metal sheets for general metal manufacturing. A cut to length line machine handles this job.
Feed material for sheet metal shops: cut sheets used as raw material for stamping, bending, laser cutting, and other sheet metal processes. A metal cut to length line often feeds these shops with consistent sheet sizes.
Metal structures and building products: sheets used in steel structure work and industrial equipment enclosures where flatness and size matter. For these jobs, a metal cut to length line helps deliver sheets with diagonal accuracy within ±2mm.


With a cut to length coil machine, the coil specs directly shape the front end setup.
Coil weight and outer diameter (load and feeding)
For heavy coils with large outer diameters, the front end needs strong load capacity and stable lifting. A metal cut to length line uses a hydraulic entry coil car with hydraulic lifting and motor driven movement, plus balance guide pillars to keep the coil steady.
The single head decoiler uses a hydraulic expand and shrink structure to hold the coil inner hole firmly and has a brake unit to prevent slipping during uncoiling.

Coil inner diameter (decoiler structure)
A metal cut to length line handles common coil inner diameters directly. For a 740mm inner diameter, the decoiler uses two rubber rings to fit the coil.
These coil sizes fit the decoiler without structural changes.

Material thickness and width (leveler rigidity)
A metal cut to length line uses a leveling machine with a multi roller setup and supporting rollers to handle stress from thicker sheets.
Between the decoiler and the leveler, the side guide device has vertical guide rollers that adjust to sheet width and guide the strip into the leveler.


This metal cut to length line delivers a flat sheet base, reliable work with different sheet thicknesses, and stable handling of heavy coils. Its main advantages are:
High flatness for downstream work
Flexible matching for different sheet thicknesses
Structural support for heavy coil loads
The leveling machine uses work rollers with supporting rollers to keep the rollers stable under load. The hydraulic cutter has automatic blade gap adjustment, and the Cr12MoV blades with four usable sides can shear sheet up to 6mm thick. For heavy coils, the hydraulic entry coil car uses balance guide pillars, and the single head decoiler uses a hydraulic expand and shrink structure with a brake unit to hold the coil firmly.

On this metal cut to length line, the encoder measures the feeding length and sends the corresponding signal to the cutting system for shearing to the set length. The cutter cuts from top to bottom. Two hydraulic cylinders provide cutting power. The encoder uses metal wheels to prevent sliding, which helps hold length tolerance within ±1.5mm and diagonal tolerance within ±2mm.
Cut sheets then move to the roller conveyor table, which connects the cutter to the pneumatic stacker. The stacker accepts cut sheets within its adjustable length range of 1000mm to 4000mm and width range of 1000mm to 1250mm. It has a sheet aligning device to stack cut sheets in order.

| Parameter | Specification |
|---|---|
| Applied material | CRC, HRC, CHECKERED PLATE (embossing within 2mm), material strength 450 MPa |
| Thickness | 1mm to 6mm |
| Width | 500mm to 1250mm |
| Coil inner diameter | Φ508mm / Φ610mm / 740mm (with 2 rubber rings) |
| Coil outer diameter | ≤ Φ1600mm |
| Max coil weight | ≤ 10 tons |
| Leveling system | 15 work rollers (7 top and 8 bottom) + 2 pinch rollers + 4 sets of supporting rollers; roller diameter Φ110mm (upper layer) / Φ100mm (lower layer); material 40Cr with high frequency quenching and chrome coating |
| Shearing system | Hydraulic cutter; Cr12MoV blades with four usable sides; automatic blade gap adjustment |
| Line speed | ≤ 15 m per minute |
| Cutting speed | 6 pieces x 2m per minute, 4 pieces x 3m per minute, 3 pieces x 4m per minute, 2 pieces x 6m per minute |
| Length tolerance | ≤ ±1.5mm (encoder with metal wheels to prevent sliding) |
| Diagonal tolerance | ≤ ±2mm |
| Leveling accuracy | ±1.5mm |
| Control system | Siemens PLC control |
| Collection system | Roller conveyor table (2.5m by 1.3m) + pneumatic stacker (length 1000mm to 4000mm, width 1000mm to 1250mm adjustable) |
| Line direction | From right to left |
| Power | 380V/3PH/50HZ |
| Line size | approx. 15m long by 5m wide |
A metal cut to length line setup should be based on the actual production task. Different metal shops have different coil sources, sheet specs, and power conditions.
For electrical supply, the equipment can be customized to local industrial power standards. The paint color can also be adjusted. For a 740mm inner diameter, the decoiler can fit matching rubber rings. Knowing your common material, thickness, width, and coil sizes is the first step to matching a line to your job.

This metal cut to length line uses a Siemens PLC control system with a touchscreen interface. Operators can set length on the screen and use the automatic counting function to track output. The system also has fault alarms to help locate issues during operation.
Contact Us For More Roll Forming Machine Detailed Information
You can contact us either through phone number 0086-15127728988 within our working hours, or send an email to [email protected], or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.