Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.

Heavy Duty Anchor Bolt Machine for Split Set Dome Plate Press with 0 to 10 pcs min Cycle Rate

‹ › When sourcing equipment for split set rock bolt manufacturing, you assess stamping station hardware and die material. You also get to know how separate production units work together. This anchor bolt machine focuses on the dome plate stamping station. It covers hardware and die selection points and introduces the full production system to…

More >

Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988

Detailed Content

Anchor Bolt Machine
Anchor Bolt Machine

When sourcing equipment for split set rock bolt manufacturing, you assess stamping station hardware and die material. You also get to know how separate production units work together. This anchor bolt machine focuses on the dome plate stamping station. It covers hardware and die selection points and introduces the full production system to aid your equipment evaluation.

Split Set Finished Products and Project Applications

This equipment produces split set rock bolt sleeves, dome plates and matching ring parts. Metal rock bolts making machine outputs components used for rock reinforcement works. Split set assemblies rely on tube wall compression for ground support without grouting in applicable scenarios. Its components find broad application in underground roadways, tunnel rock support and rock slope stabilization works.

Split Set anchor rod final product modular production line
Split Set anchor rod final product modular production line
Split Set System Machines - Application of Rock Bolts
Split Set System Machines - Application of Rock Bolts

Core Advantages of the Anchor Bolt Machine

This anchor bolt machine consists of multiple independent processing stations. The full split set component production system delivers practical value in unit structure and stamping workflow. Below are its key points.

  • Unit modules operate independently. The complete system contains five separate processing units each assigned distinct processing tasks. Buyers can evaluate required equipment according to real production tasks.
  • Punching and forming complete within one station. The dome plate press executes punching and shape forming in one setup to reduce workpiece transfer between stations and simplify processing flow.
  • Gearbox transmission for roll forming host. This mechanical setup offers stable power transfer for sleeve roll‑forming operations, delivering consistent torque during continuous component production.
Split Set Dome Plate Press Machine
Split Set Dome Plate Press Machine
Split Set Roll Forming Machine first production line for pipe body forming
Split Set Roll Forming Machine first production line for pipe body forming
Split Set Necking Machine necking detail with GCr12 mold
Split Set Necking Machine necking detail with GCr12 mold
Split Set Ring Making Machine fourth production line for ring making
Split Set Ring Making Machine fourth production line for ring making
Split Set Ring Welding Machine fifth production line for final assembly welding
Split Set Ring Welding Machine fifth production line for final assembly welding

Split Set Dome Plate Stamping Line Configuration and Processing Specifications

The dome plate serves as a critical part for split set rock bolts. Its stamping station hardware defines available processing conditions and requires careful review during equipment selection.

This station uses a 15 kW hydraulic station to supply power for dome plate punching and forming work. Hydraulic station rating is only a hardware index. It cannot equal pressing force or processing stability. Actual processing performance depends on sample test outcomes.

The setup carries out punching and shape forming within one station. It removes repeated workpiece movement across different stations and lowers extra workflow overhead.

For this configured working condition, the station handles dome plate sheet material at 5.0 mm thickness. This value matches the present equipment setup. It will not auto fit all dome plate thickness types. Re‑evaluation is needed when product specifications change.

Split Set System Machines-Hydraulic station power
Split Set System Machines-Hydraulic station power
Split Set Roll Forming Machine - Control Panel
Split Set Roll Forming Machine - Control Panel
Split Set Roll Forming Machine - Finished Product
Split Set Roll Forming Machine - Finished Product

Cr12MoV Stamping Die Material Characteristics and Selection Guidance

Dome plate stamping creates constant friction and impact force against dies. Die material choice is critical for equipment selection. Cr12MoV is a high‑carbon high‑chromium cold‑work die steel that normally delivers good hardness and wear resistance. Punching dies on this dome plate press use Cr12MoV material.

Actual die performance relies on heat treatment, die structure and real‑world working conditions. You cannot judge real production results only from die grade.

When you assess equipment, check die material match for your working scenarios. Cr12MoV die material reports can be provided upon request.

Split Set Roll Forming Machine - Pressing
Split Set Roll Forming Machine - Pressing

Full Split Set Rock Bolt Production System Unit Composition and Main Technical Parameters

Metal split set making machine covers five independent processing units. The dome plate stamping station is just one segment of the complete split set component production workflow. Five independent processing units each handle dedicated tasks to finish all related split set component fabrication.

Note. Tables below display this equipment setup. Equipment configurations can be evaluated and adjusted according to customer product requirements.

Split Set Roll Forming Machine

This unit completes split set sleeve roll forming, length cutting and notch machining.

Item Parameters
Decoiler 3‑ton manual decoiler
Feed rollers 2 rollers
Guide rollers 2 rollers
Forming roller groups 7 groups
Transmission Gearbox transmission
Voltage 380 V, 50 Hz, 3‑phase or adjusted per request
Machine frame Heavy cast steel frame with middle plate welded base
Forming speed 0–15 m/min
Applicable material thickness 2.5–3.5 mm
Shaft diameter 70 mm
Roller material Cr12 with quench treatment
Hydraulic station power 7.5 kW for notching and shearing
Control system Delta PLC
Shearing type Hydraulic stop‑to‑length shearing with simultaneous notch punching
Receiving table 2.5 m per section
Main host dimension Approx. 5800 × 1400 × 1500 mm

Split Set Dome Plate Press

This is the dome plate forming unit covered above. It finishes punching and forming within one station.

Item Parameters
Hydraulic station power 15 kW
Voltage 380 V, 60 Hz, 3‑phase or adjusted per request
Cycle rate 0–10 pcs/min
Punch die material Cr12MoV
Applicable sheet thickness 5.0 mm

Split Set Necking Machine

This machine performs necking work for finished sleeves.

Item Parameters
Hydraulic motor power 3 kW
Voltage 380 V, 50 Hz, 3‑phase or adjusted per request
Die material GCr12

Split Set Ring Making Machine

This unit produces matching component rings for split‑set bolt assemblies.

Item Parameters
Drive motor power 2.2 kW
Voltage 380 V, 50 Hz, 3‑phase or adjusted per request
Die material GCr12
Applicable wire diameter 6–8 mm
Production speed 40–45 pcs/min

Split Set Ring Welding Machine

Metal rock bolts making machine supports multi‑station fabrication of rock bolt related finished assemblies. This station completes ring welding operations for bolt component assembly.

Item Parameters
TIG welder model 350
Voltage 380 V, 60 Hz, 3‑phase
Workpiece length range 1.2–2.8 m
Workpiece diameter range 28–50 mm
Welding speed 4 pcs/min
Welding type Single ring welding

Pre‑sales Support and Equipment Purchase Consultation

Available project validation choices include video test, video call test and on‑site physical test. Remote technical guidance is offered after equipment delivery. On‑site installation and spare‑part supply need clear terms defined within formal project contracts.

To get proper configuration evaluation for this anchor bolt machine, share your split set component drawings, sheet specifications and production targets. We will deliver targeted solution evaluation based on your submitted information.

Contact Information
Contact Information
Edit "Heavy Duty Anchor Bolt Machine for Split Set Dome Plate Press with 0 to 10 pcs min Cycle Rate"

Contact Us For More Roll Forming Machine Detailed Information
You can contact us either through phone number 0086-15127728988 within our working hours, or send an email to [email protected], or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.

Elliot liu