METAL ROLL FORMING MACHINE
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
Zhongtuo roll forming Systems is a "one-stop shop" for all your roll forming needs,enabling our customers to save time and money when buying roll forming machines,to help customers grow.
For buyers of ceiling grid production equipment, the T Bar Ceiling Grid Roll Forming Machine is relevant when main tee, cross tee, and wall angle are considered together. These three finished products play different roles in a ceiling system, and each one corresponds to a different production line. This equipment covers three profile types and aligns each…
Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988
Detailed Content

For buyers of ceiling grid production equipment, the T Bar Ceiling Grid Roll Forming Machine is relevant when main tee, cross tee, and wall angle are considered together. These three finished products play different roles in a ceiling system, and each one corresponds to a different production line. This equipment covers three profile types and aligns each production task with a dedicated forming line.
A ceiling grid system uses three main profile types, each produced on a different machine.
Main Tee runs along the room length and forms the ceiling grid frame. A T Bar Ceiling Grid Roll Forming Machine produces Main Tee in 38x24x3600mm.
Cross Tee crosses Main Tee at a right angle and divides a large space into standard grid units. Cross Tee common sizes are 26x24x1200mm and 26x24x600mm.
Wall Angle fixes along the room perimeter and finishes the ceiling edge. Wall Angle common size is 22x22x3000mm.
The three profile types are handled by three production lines. Their section sizes and length specifications differ, so their forming configurations differ.


These three profiles are used in offices, commercial buildings, hospitals, schools, shopping malls, and other places that need suspended ceilings. Main Tee forms the frame, Cross Tee creates the grid, and Wall Angle finishes the edge.

A T Bar Ceiling Grid Roll Forming Machine organizes production around Main Tee, Cross Tee, and Wall Angle. The three production lines correspond to three finished product specifications. Parameters from one line are not applied to the other two lines.

The Main Tee line forms Main Tee profiles in 38x24x3600mm.
| Parameter | Main Tee Roll Forming Machine |
|---|---|
| Finished profile size | 38x24x3600mm |
| Forming steps | 18 steps |
| Forming speed | 0 to 25 m/min |
| Main motor | 4 kW |
| Hydraulic station motor | 3 kW |
| Servo motor | 1.2 kW |
| Voltage | 380 V 50 Hz 3 phase |
| Roller material | Cr12 quenched |
| Shaft material | 45# steel quenched, OD 40mm |
| Decoiler | Inner diameter 450 to 550 mm, capacity 1.5T |
| Drive type | Chain |

The Cross Tee line forms Cross Tee profiles in 26x24x1200mm and 26x24x600mm.
| Parameter | Cross Tee Roll Forming Machine |
|---|---|
| Finished profile size | 26x24x1200mm and 26x24x600mm |
| Forming steps | 16 steps |
| Forming speed | 0 to 25 m/min |
| Main motor | 4 kW |
| Hydraulic station motor | 7.5 kW |
| Servo motor | 3.8 kW |
| Voltage | 380 V 50 Hz 3 phase |
| Roller material | Cr12 quenched |
| Shaft material | 45# steel quenched, OD 40mm |
| Decoiler | Inner diameter 450 to 550 mm, capacity 1.5T |
| Drive type | Chain |

The Wall Angle line forms Wall Angle profiles in 22x22x3000mm.
| Parameter | Wall Angle Roll Forming Machine |
|---|---|
| Finished profile size | 22x22x3000mm |
| Roller sets | 8 sets |
| Forming speed | 0 to 40 m/min |
| Main motor | 3.0 kW |
| Hydraulic station motor | 3 kW |
| Servo motor | Not specified |
| Voltage | 380 V 50 Hz 3 phase |
| Roller material | GCr12 |
| Shaft material | 45# steel tempered |
| Decoiler | Inner diameter 450 to 550 mm, capacity 1.5T |
| Drive type | Chain |
The control system includes a touchscreen interface. Language options and operating functions depend on the specific equipment configuration and can be discussed with the technical team.


This Suspended Ceiling T Grid Roll Forming Machine is customized to customer needs. One equipment set corresponds to one configuration plan, and different customers do not share one fixed set of equipment parameters.
Customers can raise requirements for speed, voltage, profile specifications, production length, and other configuration items. The specific items, feasibility, and range need technical confirmation based on the customer's steel coil specifications, finished product requirements, and production needs. Customers can share their finished product specifications, common lengths, steel coil conditions, and production plan to discuss a suitable configuration.
Main Tee, Cross Tee, and Wall Angle ceiling profiles each correspond to one production line. The T Bar Ceiling Grid Roll Forming Machine organizes its configuration around the production tasks of these three finished products. Buyers can discuss the equipment plan further based on their target finished product specifications, required lengths, and production needs.
Contact: Elliot liu
Email: [email protected]
WhatsApp: 008615127728988
Contact Us For More Roll Forming Machine Detailed Information
You can contact us either through phone number 0086-15127728988 within our working hours, or send an email to [email protected], or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.